AlexMos 32 BIT Extended BGC with GBM2804H-100T Combo Set

Product Description

iFlight Original BaseCam SimpleBGC 32-bit Extended Gimbal Controller, it is base on the 32-bit simple Brushless gimbal controllers. It features built-in frame IMU, CAN-bus replace I2C for the IMU sensor and other periphery connection.

New Capabilities:

*Built-in Frame IMU

*Current sensor to measure battery power consumption

*CAN-bus to replace I2C for the IMU sensor and other periphery connection

*Dedicated 3x SPI/PWM ports for encoder connection

*Additional I2C port to connect 2nd IMU or encoders

*Built-in sound beeper

*Up to 6s LiPo battery is supported

Specifications:

Size of the board: 50×50 mm

The distance between the mounting holes: 45 mm

The diameter of the mounting holes: 3 mm

Power supply voltage: 8-26 V (3s-6s LiPo)

Maximum motor current: 1,5 A

5V output current to power external devices: up to 1 A

3V output current: 150 mA

iPower GBM2804H-100T Hollow Shaft Brushless Gimbal Motor

Operating Condition:

Rated voltage: DC 10V

KV:154KV±5%

Voltage range: DC 8－14V

The environment of use: Environment of use; Environment of use (No condensation of water vapor)

Save environment: Save environment; Humidity:5~95%RH (No condensation of water vapor)

Measuring condition:

Temperature:25±2℃

Humidity:65±20%

Motor state: Motor shaft horizontal(lock the motor in a test fixture)

Remarks: above test is under temperature:25℃, Humidity:65%RH

Mechanical Specification:

Weight:39.1±1g

The angle of rotation:360°

Performance and characteristies:

No-load speed:1545±5%RPM (Voltage=10V)

No-load current:0.07±0.005A (Voltage=10V)

Phase resistance:10.1Ω±5%

Cable length:30CM

Package included:

- 3x iPower GBM2804H-100T Gimbal Motor

- 1 x Alexmos 32BIT Extended BGC set with alum case

- 1 x  Connecting cables set

NOTE: It is not compatible with slipring!